Customization: | Available |
---|---|
Type: | Ultrasonic Scalpel |
Kind: | Laparoscopic |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Generator
The generator is a device (or generator) that is used to generate and supply power and output control to an ultrasonic transducer. Activating the footswitch or manual switch adapter provides power output. The generator generates electrical energy signals that are transmitted to the transducer through a cable and the transducer converts the electrical energy signal into mechanical motion of the ultrasonic wave.
Hand piece transducer
Hand Piece transducer converts electrical energy from the main generator mechanical movement. Handle with ultrasonic receiver connected to the amplifier, the amplitude of the latter amplification produced by transducer handles, energy transfer and movement to the instrument. Transducer lever handle also provides equipment connected to the host hand control signal.
Hand piece scalpel
Transfer and amplification ultrasonic mechanical energy from the transducer handles to the organization, to ensure that appropriate clamping force, implementation of check hemorrhagic cutting and/or the organization setting.
The instrument includes a manual switch adapter (MIN, MAX manual switch) and a wheel-integrated locking wrench.
Foot switch
Activated and transfer the information to the host carrier generator switch. In both the minimum (MIN) or maximum (MAX) mode, once the foot switch is pressed, the pedal will be activated and the information transmitted to the generator.
The main components about the Ultrasonic Scalpel System
Component: generator, hand piece transducer, hand piece scalpel, and foot switch.
External dimensions | 36cm (L) x 40cm (W) x 16cm (H) |
Input power | AC220V, 50Hz |
Rated power | 100VA |
Fuse
|
3A |
Excitation frequency | 55.5kHz ± 1.0kHz |
Ambient temperature | 10 °C to 40 °C |
Relative humidity | ≤75% |
Atmospheric pressure
|
700hPa to 1060hPa
|